The main steps in proper mold remediation
Mould is ever-present in outdoor environments, being nature’s most important recycling centre owing to the fact that it breaks down the dead organic matter from plants and animals. This fungus manages to make its way through your life, but you do not realize it because more often than not it does not cause ill effects. However, things are different when mould is present in an indoor environment. Its accompanying spores, which you are most likely to find in large concentrations, can become a serious health hazard. The main issue with this fungus is that it is not easy to find and this is why you should consider hiring professionals specialized in Toronto mould testing. Only after you determine the seriousness of the situation, can you think about remediation.
One very important step in properly diagnosing a mould issue is visual inspection. During the course of the investigation, professionals will look through accessible areas of the house in order to locate potential water penetration and other issues. The main role of the visual inspection is to find visible evidence of mould growth through the habitable areas of the property. Once evidence is found, samples are generally taken for analysis. This action is performed in order to determine if the spore counts from the indoor air are unusual in comparison to the spore counts from the outdoor air. The samples once tested, the inspector will provide you with a written report detailing the findings.
Remediation implies clearing up the existing mould and avoiding exposure to yourself because the spores are likely to be stirred up in the air. The first step in the remediation process is to remove the moisture source, otherwise new fungus will start to grow on the moist surfaces. An effective way to clean fungus is to use detergent solutions, although you have the opportunity to hire companies that specialize in removing the mould and eliminating the odour. If the growth is significant, then professional remediation is of paramount importance.
If any structural components are removed during the remediation process, then it is obvious that you should replace them. If it is possible, you should not try using cheaper plywood because it will allow moisture trapping. You should also make sure to check insulated areas for proper installation and, last but not least the window areas and the pipes should be properly sealed to avoid future issues.